If you need to drive camshaft with dpf filter, email us before buying. Hydraulic tappets (hard type) x8 parts. Shaft motor parts Mounting information has cams. Verify that the new camshaft is identical to the old camshaft, particularly regarding the oil passages.
Make sure the tree has cams pads are not worn or damaged from excessive way. Verify that the valves, valve seats, the LIQUIDS, springs and seals tightness of the valve stems are in good condition. Gears distribution and distribution channels should be examined to detect any wear.Replacement or machining must be performed in accordance with needs. The timing belts should be replaced always when installing a new camshaft. On the new camshaft, check that the oil passages are clean and not clogged. Completely remove any preserving agent of all contact surfaces, taking care not to damage the pads or contact faces. New cam / push rod has to be mounted.
This is very important in order to avoid a premature wear of the camshaft. Claims will be invalidated if this operation is not performed. Grease thoroughly all the cam bearings and shaft cam lobes with a pre-lube or engine oil of good quality.
The axial play of the camshaft must be checked and settled in accordance to the workshop manual of the engine manufacturer. Fill crankcase with new oil and install a new oil filter. Finally, a push rod must be audited and rules correctly. This operation must be repeated after a journey of 800 kms.If you broke the camshaft again then it suitable there. The item \engine parts \ camshafts. \The seller is \This article can be shipped worldwide.